Snow Melting Stair Mat

Snow Melting Stair Mat

Residential Snow-Melting Stair Mat

Snow Melting Stair Mat


Snow Melting Stair Mat

Snow-melting stair mat for residential use; measures 10 x 30 inches

Can be used independently or interconnected to other stair or walkway mats

Made of customized thermoplastic material

Melts 2 inches of snow per hour; designed to be left outside for the entire winter season

Requires 120-volt power unit (sold separately)

Product Description

Keep your home stairs safe and snow-free all winter long with HeatTrak’s Residential Snow-Melting Stair Mat.

This electric heating mat melts snow on contact to prevent snow and ice accumulation on stairs around the home.

Simple to use: Just lay it out, plug it in, and watch snow melt on contact.

No more Shoveling, No more Salting, and No more Slipping! 

Connect Residential Stair Mats and Residential Walkway Mats to cover any size area!

Each set of Residential Mats requires 1 HeatTrak Power Unit (sold separately, Model HR-P) to connect the system to an electrical outlet.

Snow Melting Stair Mat

Up to 13 amps can be connected on a single Power Unit; That’s either 15 Residential Stair Mats, 5 Residential Walkway Mats, or any combination thereof.

See Selection Guide in the Product Details section for more information. Each mat sold separately.

Size: 10 Inches x 30 Inches,

Amps: 0.6, Voltage: 120Vac,

Material: Customized Thermoplastic. When ordering, remember these important points:

The Power Unit is not included;

Each set of HeatTrak Residential Snow-Melting Mats requires 1 Power Unit (model no. HR-P) to connect the system to an electrical outlet.

If you don’t buy a Power Unit your mats will not work. This item requires a 120V electrical outlet.

Snow Melting Stair Mat

This mat is for snow-melting only; Never cover mats, never use indoors, and never use for animals or animal houses.

Do not use on composite decking.

The mat is waterproof and designed to be left outside all winter long.

Residential Products can only connect to Residential Products; They do not connect to Industrial Products. Each mat sold separately.

Prevent snow and ice accumulation on stairs around your home with this snow-melting stair mat,  for residential use. 

Safer, Cleaner Walkways

HeatTrak’s heating mats are the best solution for winter slip prevention, as they continuously melt snow and ice keeping surfaces constantly clear.

And with a HeatTrak system in place there is no need for shoveling, leaving you with a happier back and healthier heart.

Additionally, HeatTrak mats eliminate the need for salting entranceways, which can lead to messy floors indoors.

HeatTrak mats also help preserve sidewalks, as calcium chloride will eat away at walkways over time.

Easily Portable, No Expensive Installations

With HeatTrak there is no need for expensive installations.

HeatTrak mats are portable and designed to lie on top of existing surfaces.

Just place a HeatTrak mat over existing walkways, stairs, entranceways, and ramps to provide a clean and safe passageway for foot and wheelchair access.

Durable and Safe

The engineers at HeatTrak have taken great care to develop a durable, safe, and effective snow and ice melting system, which can be left outside for the entire winter season.

They plug directly into any standard 120-volt outlet using their own ground fault circuit interrupter (GFCI).

HeatTrak Snow-Melting System

With the HeatTrak snow-melting system, you can mix and match stair mats and walkway mats to create your perfect snow-melting solution.

The heart of the system is the power unit  which connects to a properly grounded, standard 120-volt electrical power outlet.

The power unit enables you to connect a total of 15 amps, and a single power unit can connect up to 5 walkway mats 

Snow Melting Stair Mat

or up to 15 stair mats (0.6 amps each), or combine a mixture of the two so that the total comes to 15 amps or less.

If your connected mats exceed 15 amps, you’ll have to split up the mats and use a second power unit plugged into a separate outlet.

Walkway mats measure 20 x 60 inches, and you’ll need one for every 5 feet of sidewalk (providing a space of approximately 3 inches between each mat).

Snow Melting Stair Mat

Sidewalk mats measure 10 x 30 inches, and you’ll need one for each stair.

The power unit has a 6-foot cable, but if your electrical outlet is beyond that reach, HeatTrak recommends using its 25-foot cable extender (model HR-EXT25

Additionally, when you have a stairway mat connected to a walkway mat, you’ll need a 20-inch extender (model HR-EXT20).

For best results, turn on your HeatTrak mast at least 30 minutes before snowfall so that it melts snow on contact .

Then, keep the mats on a few hours after snow has stopped as you may have water runoff.

The mats work effectively down to -5 degrees F and melt snow at approximately 2 inches per hour.

Snow Melting Stair Mat

To operate the mats, you will need to go outside to turn them on via the power unit.

To automatically control the mats from inside your home, you can purchase the optional wireless control outlet and switch,. 

Alternatively, you can purchase HeatTrak’s optional 10-inch thermostat extension cable , which plugs into the power unit from an electrical outlet and will automatically turn on your mats when the temperature drops below 35 degrees F.

Another option is HeatTrak’s thermostat and snow sensing controller , which turns on your mats when the temperature is below 38 degrees F and it senses moisture.




Leave a Reply

Proudly powered by WordPress | Theme: Baskerville 2 by Anders Noren.

Up ↑